Prehľad:

Aruba 7005 Mobility Controller je kompaktná základná pobočková platforma bez ventilátora, ktorá môže byť napájaná prepínačom power-overEthernet (PoE).

Mobility Controllers série Aruba 7000 optimalizujú cloudové služby a zabezpečujú podnikové aplikácie pre hybridné WAN v pobočkách a zároveň znižujú náklady a zložitosť nasadenia a správy siete.

Mobility Controllery radu 7000 kombinujú bezdrôtové, káblové a hybridné WAN služby, podporujú až 64 AP a 24 ethernetových portov a obsahujú integrovanú WAN kompresiu, kontroly stavu, bezdotykovú konfiguráciu a smerovanie založené na politike. Séria 7000 tiež zjednocuje správu politík s bezpečnostnými službami tretích strán, vďaka čomu je vytváranie digitálneho prostredia na pracovisku v ústredí a pobočkách jednoduchšie a bezpečnejšie.

Séria 7000 podporuje viac ako 4 000 používateľov a vykonáva stavové presadzovanie politiky brány firewall rýchlosťou až 8 Gbps. Zabezpečené IP tunely chránia WAN prevádzku cez verejnú a súkromnú dopravnú sieť do cloudu a dátového centra. Medzi ďalšie funkcie patrí integrovaný firewall, zabezpečená VPN, 3G/4G LTE celulárne zlyhanie, správa hrozieb s filtrovaním obsahu a lokálne premostenie na základe požiadaviek aplikácie koncového používateľa alebo IT prevádzky.

Séria 7000 podporuje Aruba's Next-Generation Mobility Firewall s technológiou AppRF™, ktorá nepretržite vyhodnocuje využitie a výkon aplikácií pre viac ako 1 500 aplikácií vrátane cloudových a webových služieb, ako sú Skype for Business, SharePoint, Box, Salesforce.com a aplikácie, ktoré sú skryté ako šifrovaný alebo webový prenos. Potom automaticky vykoná zmeny konfigurácie v reálnom čase, aby sa zabezpečila optimálna šírka pásma, priorita a sieťové cesty v pobočkách a vzdialených pobočkách, aby sa zabezpečila najlepšia možná používateľská skúsenosť.

Ovládací panel v reálnom čase uľahčuje identifikáciu a opravu značiek kvality služieb, vyrovnávanie záťaže špecifických aplikácií naprieč AP, úpravu RF manažmentu a parametrov roamingu pre aplikácie citlivé na latenciu a aplikovanie zmlúv o šírke pásma podľa aplikácie alebo typu aplikácie.

Vďaka integrácii s cloudovými službami, ako sú Palo Alto Networks GlobalProtect a Microsoft Skype for Business, je rozšírenie zabezpečenia a QoS pre mobilnú zjednotenú komunikáciu jednoduchšie a spoľahlivejšie v rámci distribuovaného podniku a zároveň znižuje lokálnu zložitosť.

Séria 7000 zvláda ďalšie dôležité podnikové funkcie, ako je autentifikácia, šifrovanie, služby IPv4 a IPv6, Adaptive Radio Management, ClientMatch a RFProtect spektrálna analýza a bezdrôtová ochrana proti narušeniu. Séria 7000 môže byť nasadená v priebehu niekoľkých minút s bezdotykovým poskytovaním prostredníctvom cloudovej Aruba Activate, čo umožňuje IT nasadzovať pobočky jednoduchšie a efektívnejšie.

Popis produktu:

Aruba IAP-205 (RW) Instant 2x2:2 11ac AP

Features and Benefits
Unique Benefits

Wi-Fi client optimization
- To eliminate sticky client behavior while users roam, 200 series APs feature patented ClientMatch technology, which continuously gathers session performance metrics from mobile devices.

- If a mobile device moves away from an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.

Advanced Cellular Coexistence (ACC)
- ACC lets WLANs perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femtocell equipment.

Quality of service for unified communication apps
- The 200 series APs support priority handling and policy enforcement for unified communication apps, including Microsoft Lync with encrypted videoconferencing, voice, chat and desktop sharing.

Choose your Operating Mode

The 200 series APs offer a choice of operating modes to meet your unique management and deployment requirements.

Controller-managed AP or Remote AP (RAP) running ArubaOS.
When managed by Aruba Mobility Controllers, 200 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
Aruba Instant AP running InstantOS.
In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs - the entire process takes about five minutes.
For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up.

If WLAN requirements change, a built-in migration path allows 200 series Instant APs to become part of a WLAN that is managed by a Mobility Controller.

AP 200 Series Specifications

AP-205 and IAP-205
- 2.4-GHz (300 Mbps max rate) and 5-GHz (867 Mbps max rate) radios, each with 2x2 MIMO and four integrated omni-directional downtilt antennas.

AP-204 and IAP-204
- 2.4-GHz (300 Mbps max rate) and 5-GHz (867 Mbps max rate) radios, each with 2x2 MIMO and two combined, diplexed external RP-SMA antenna connectors.

Advanced Features

RF management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.

- The 200 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

Spectrum analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.

Security
- Integrated wireless intrusion protection offers thread protection and mitigation, and eliminates the need for separate RF sensors and security appliances

- IP reputation and security services identify, classify, and block malicious files, URL and IPs, providing comprehensive protection against advanced online threats

- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

- SecureJack-capable for secure tunneling of wired Ethernet traffic.

Operating Modes

Aruba Instant AP
Mobility Controller-managed AP
Remote AP (RAP) for branch deployments
Air monitor (AM) for wireless IDS, rogue detection and containment
Spectrum analyzer, dedicated or hybrid
Secure enterprise mesh
Wireless Radio Specifications

AP type: Indoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n 2x2:2
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
2x2 MIMO with two spatial streams and up to 867 Mbps wireless data rate
Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
- 2.4000 GHz to 2.4835 GHz

- 5.150 to 5.250 GHz

- 5.250 to 5.350 GHz

- 5.470 to 5.725 GHz

- 5.725 to 5.850 GHz

Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b:  Direct-sequence  spread-spectrum (DSSS)

- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types:
- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
- 2.4-GHz band: +21 dBm (18 dBm per chain)

- 5-GHz band: +21 dBm (18 dBm per chain)

Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beamforming (TxBF) for increased reliability in signal delivery
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n: 6.5 to 300 (MCS0 to MCS15)

- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)

802.11n high-throughput (HT) support: HT 20/40
802.11ac very high throughput (VHT) support: VHT 20/40/80
802.11n/ac packet aggregation: A-MPDU, A-MSDU
Antennas

AP-204/IAP-204: Two RP-SMA connectors for external dual band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4 GHz and 3.0 dB in 5 GHz.
AP-205/IAP-205: Four integrated downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz and 6.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is approximately 30 degrees.
Other Interfaces

10/100/1000BASE-T Ethernet network interface (RJ-45)
- Auto-sensing link speed and MDI/MDX

- 802.3az Energy Efficient Ethernet (EEE)

- PoE-PD: 48 Vdc (nominal) 802.3af PoE

DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
Visual indicators (LEDs):
- Power/system status

- Ethernet link status (ENET)

- Radio status (two; RAD0, RAD1)

Reset button: factory reset (during device power up)
Serial console interface (RJ-45)
Kensington security slot
Power

Maximum (worst-case) power consumption: 12.5 watts (PoE) or 11.7 watts (DC)
Maximum (worst-case) power consumption in idle mode: 8.4 watts (PoE) or 7.7 watts (DC)
Direct DC source: 12 Vdc nominal, +/- 5%
Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af-compliant source
Power sources sold separately
When both power sources are available, DC power takes priority
Mounting

Included with AP:
- Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling

Spare mounting kit:
- AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails

Optional mounting kits:
- AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails

- AP-220-MNT-W1: Aruba AP mount kit contains one basic flat-surface wall/ceiling mount  bracket

- AP-200-MNT-W2: Aruba AP mount kit contains one secure flat-surface wall/ceiling mount cradle

Mechanical

Dimensions/weight (unit, excluding mount accessories):
- 150 mm x 150 mm x 41.5 mm (W x D x H)

- 380 g

Dimensions/weight (shipping):
- 190 mm x 187 mm x 57 mm (W x D x H)

- 550 g

Environmental

Operating:
- Temperature: 0° C to +40° C (+32° F to +104° F)

- Humidity: 5% to 95% non-condensing

Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)

Regulatory

FCC/Industry of Canada
CE Marked
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 489
EN 301 893
UL/IEC/EN 60950
EN 60601-1-1 and EN 60601-1-2
For more country-specific regulatory information and approvals, please see your Aruba representative

Reliability

MTBF: 711,187 hours (81.2 years) at +25° C operating temperature

Regulatory Model Number

AP-204 and IAP-204: APIN0204
AP-205 and IAP-205: APIN0205
Certifications

CB Scheme Safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

PD-3501G/AC

Jednoportový Gigabit PoE Midspan, kompatibilný s 802.3af

• Prehľad
• Špecifikácia
• Kúp online
• Zdroje
• Obrázky produktov
• Parametrické vyhľadávanie
• Objednávanie
• podpora

 

Microsemi PD-3501G Power over Ethernet (PoE) s jedným portom Midspan (PoE injektor) ponúka kompaktné a nákladovo efektívne, plne IEEE 802.3af kompatibilné riešenie pre IP telefóny, WLAN prístupové body, sieťové kamery a ďalšie inštalácie IP terminálov.
PD-3501G PoE midspan ponúka kompaktné, cenovo dostupné a spoľahlivé napájanie cez štandardné ethernetové káble, pričom sieťová infraštruktúra zostáva úplne nezmenená.
S inštaláciou typu plug-and-play midspan sa jednoducho a nákladovo efektívne implementujú s využitím existujúcej ethernetovej infraštruktúry a zároveň poskytujú istotu siete odolnej voči budúcnosti.

Vlastnosti

• Bezpečné a spoľahlivé napájanie cez existujúcu ethernetovú infraštruktúru
• Stohovateľný a kompaktný
• Podpora Cisco a starších PoE*
• Plug-and-play inštalácia
• Zaručená doba prevádzkyschopnosti